This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
chemical_water_treatment_and_water_conditioning [2019/02/07 13:34] superman |
chemical_water_treatment_and_water_conditioning [2019/07/01 13:42] (current) superman |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ==== Chemical Water Treatment and Water Conditioning==== | + | **WikiSIS** is the place where you can find all the answers to preventing the [[wikisis|Sick Installation Syndrome (SIS)]]. |
- | The condition of the fill and system water can have a marked effect on the corrosion potential. Water is a cheap and plentiful medium and is, therefore, the preferred liquid. Water isn't just water and water chemistry is very complex. It can be highly corrosive to steel and other metals if certain values such as pH and conductivity are unfavourable. | + | **Topics that affect SIS:** |
- | There are different methods of achieving the right water chemistry. The water can be either conditioned or chemically treated or both. | + | * <fs 90%>[[Pressurisation|Pressurisation]]</fs> |
- | There are many water treatment chemicals on the market. Chemical dosing can be beneficial under certain circumstances. However, it should be viewed like medication and only used to fight very specific problems. A healthy system does not need any chemical additives. If problems occur it is always better to find out the causes and rectify them before resourcing to chemical dosing. | + | * <fs 90%>[[Corrosion|Corrosion]]</fs> |
+ | * <fs 90%>[[Gases|Gases]]</fs> | ||
+ | * <fs 90%>[[chemical_water_treatment_and_water_conditioning|Chemical Water Treatment and Water Conditioning]]</fs> | ||
+ | ===== Chemical Water Treatment and Water Conditioning ===== | ||
+ | The condition of the fill and system water can have a marked effect on the corrosion potential. Water is a cheap and plentiful medium and is, therefore, the preferred liquid for transporting heat around a heating or cooling system. Water isn't just water and water chemistry is very complex. It can be highly corrosive to steel and other metals if certain values such as dissolved oxygen content, pH and conductivity are unfavourable. | ||
+ | There are different methods of achieving the right water chemistry. The water can be either conditioned or chemically treated or both. | ||
+ | There are many water treatment chemicals on the market. The most common ones are corrosion inhibitors. Chemical dosing can be beneficial under certain circumstances. However, it should be viewed like medication and only used to fight very specific problems or if the ingress of oxygen e.g. in open systems, cannot be avoided. A properly sealed system does not need any chemical additives to prevent corrosion. If problems occur which are attributable to corrosion or its effects, it is always better to first find out the causes and rectify them before resourcing to chemical dosing. In other words, find the causes and fix them rather than just fighting the symptoms.\\ | ||
+ | {{:gruppenfoto_fuellgeraete_mit_ferriline_web_mitte_1680x550.png?400 | | ||
+ | }}\\ | ||
+ | \\ | ||
+ | \\ | ||
+ | \\ | ||
+ | \\ | ||
+ | \\ | ||
+ | \\ | ||
+ | <fs 75%> Typical water conditioning equipment </fs> | ||